Professional Door Installation Tips | Locksmith Services Sydney

By on March 1st, 2021

5 min Read

 blog image

Are you confident in your handyman skills? If no, all it takes is following the right instructions. However, door installation is not a task each of us can complete. Removing old doors and installing new ones is the hard part. You might need locksmith services to complete this process.

Professionals not only give your house a fresh look; they ease the installation process.  But before you get to the point of needing one, we have a guide to get you started. 

In this guide, we walk you through the process of professional door installation. Whether you’re confident enough for a DIY project or working with a professional, these tips will be helpful.

Learn About Door Types From A Locksmith Services Specialist

This is the first decision you’ll make when you’re shopping for a replacement. You’ll find out that most doors are in two categories: the pre-hung door and simple door options.

Pre-hung doors usually come with a complete installation set. This includes the door frame, hinges and hardware. This type of door is generally whole and can be ready for use once installed.

It’s a great buy for homeowners who are new to door installation. You may be installing the entire door, changing the size of the doorway or adding completely new space. Also, pre-hung doors make the door installation process faster and easier.

The simple door selection is a favourite among homeowners. And that is because it offers more room for customisations. That aside, it allows you to make use of the existing door frame. 

Simple doors are purchased as they are. You’ll have to install the hardware on your own.

If you need more information on what option to go with, speak to a locksmith services specialist. 

Put The Hardware In Place Before Professional Door Installation

It is advisable that you attach the hardware before you install the door. If you’re working with a simple door, you’ll also have to stain-proof or paint or stain proof it. 

We recommend that you hire locksmith services when attaching hardware i.e. doorknobs and locks. In fact, professional door installation utilises time and maximises efficiency.

Pre-hung doors will come with their own hardware set. For professional door installation, you’ll need the following materials:

  • Galvanised nails (Different lengths)
  • Screws(Different lengths)
  • Mallet
  • Caulk
  • Extra wood
  • Measuring instruments
  • Screwdriver
  • Hammer
  • Saw
  • Level
  • Marking Pencil

Removing The Old Door And Frame

Now that you’ve successfully fitted the hardware onto the new door, it’s time to remove the old parts. You can begin by removing the door hinge pins. In case you’re going to reuse your existing door frame, remove any attachments-hinges, nails and screws.

Use a special saw to cut through the remaining nails and screws between the door frame and wall. Gently knock on the frame edges with a hammer or mallet to safely detach it from the wall. If the door frame is still firmly fixed, cut it down to small pieces for easy removal.

Take Doorway Measurements ( Consult A Locksmith Services Provider If You Are Clueless)

Removing the door frame gives you a clear view of the doorway space. Take accurate measurements of the doorway’s height and width. You don’t have to be pinpoint accurate. Just enough to ensure the door and frame fit properly.

If you’re installing a special door(e.g. sliding doors), there are more adjustments. For example, you’ll have to extract the interior wall on one of the opening sides to create room. This allows you to install necessary hardware, like the sliding door frame and door rollers.

Speak to a locksmith services provider if you feel that you could use extra help in getting the measurements right. 

Levelling The Floor

To make sure your doors fit and hang evenly, you may need to level your floors. Uneven floors can cause the newly installed door to drag on one side. This causes damages to both your floor and door.

You can place a level at the doorstep to find out if your floor is even. If not, you’ll have to cut the bottom part of the jamb or door lining, till the door hangs evenly.

Apart from that, you can use shims to help you level the door. Shims are small pieces of shaped wood that create an even platform for the door. This helps you figure out the perfect fitting position before installing the door.

Use Wooden Blocks To Temporarily Test The Accuracy Of The Door And Frame

At some point, you’ll have to prop the door and frame for fitting accuracy. It can be challenging to do this on your own. This is why you need professional door installation services. By placing temporary blocks on the door lining, it makes the fitting and installation process easier.

If you’ve purchased a pre-hung door, avoid using temporary blocks. The blocks may leave holes on the door after removal.

Include A Door Gap

Door gaps are extremely important. As you’re going through the door installation, ensure there’s an even gap between the frame and the doorway space. This ensures the door and frame expand and contract evenly as seasons change.

Make Final Adjustments On Door Alignment And Install Hinges

Now that you’ve fitted the door and frame accurately, it’s time to test how firm the door is. You can add extra nails or screws on the hinge side of the door as a security measure. This should hold the door in place once you remove the temporary blocks.

If not, carefully loosen the nails or screws. Put shims on either side of the door lining and adjust till you get a perfect fit. Thereafter, you can securely attach the hinges.

Fix The Door Locks

This is where locksmith services come in handy. They can help you accurately attach the door latches and adjust lock mechanisms.

Caulk The Exterior Part Of The Door

Make a thorough inspection of the exterior door lining and ensure it is airtight. Over time, moisture and air can damage the door’s structural integrity. Caulking helps reinforce the exterior lining and keep it sealed from moisture and air.  That aside, you can fill any holes or cracks left if you use temporary holding blocks.

Generally, when it comes to professional Door installation, it’s best to consult the experts. They can further advise you on the best items to buy, equipment to use and procedures to follow.  Talk to a locksmith services provider today before you begin your installation. 

More blog posts for you